LIMITED Tenders/Contracts/Purchases of goods/services floated/awarded by the Company

Note: Only REGISTERED VENDORS may submit their quotation. For registration as vendor, please refer Vendor Registration Page under "Tender" from homepage.

Year

Month

LIMITED TENDERS FLOATED BY THE COMPANY

CONTRACTS AWARDED BY THE COMPANY

Division

Sl.No.

Tender/Enquiry No.

Date of Publication of Tender/Enquiry

Item/Nature of Work

Type of Bidding (Single(1)/ Two Bid(2) System)

Last date of receipt of tender

No. of Tenders received

Nos. and names of parties qualified after technical evaluation

Nos. and names of parties not qualified after technical evaluation

Whether contract awarded to Lowest tenderer(L1)/ Evaluated L1(E1)

Contract No. and Date

Name of Contractor

Value of Contract (Rs.L)

Scheduled date of completion of supplies

Description

Unit

Qty.

2008

May

PROJ/DVC-BIADA/070

5-May-08

Cement (Grade - 53) Portland

TON

9-Apr-00

Single(1)

13-May-08

3 (Sandeep Enterprise, Rounak Enterprises, B.K. Brothers)

nil

Lowest tender(L1)

BLL/PROJ/DVC-BIADA/ORD/066 Dt. 22.05.08

Sandeep Enterprises

482000

2 days

Approved Make : Make – LAFARGE / ACC / L&T (ULTRATECH) / BIRLA CEMENT, Durgapur

PROJ/DVC-BIADA/070

5-May-08

Cement (Grade - 53) Portland

TON

100

Single(1)

13-May-08

Approved Make : Make – LAFARGE / ACC / L&T (ULTRATECH) / BIRLA CEMENT, Durgapur

PROJ/DVC-BIADA/071

5-May-08

Construction of Security Fencing :-

Single(1)

14-May-08

3 (S.R.Enterprise, G.M. Construction, Jaya Enterprises)

nil

Lowest tender(L1)

BLL/PROJ/DVC-BIADA/ORD/073 Dt. 17.06.08

G. M. Construction

77730

60 days

Earthwork in excavation over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50.0 m & lift upto 1.5 metre, disposed earth to be levelled & neatly dressed etc. complete as per specification, drawing and instructions of Engineer-in-Charge.

All kinds of soil

Cum

Ordinary rock

Cum

Hard rock ( requiring blasting)

Cum

Laying in position Reinforced Cement concrete work with coarse sand & 20 mm. & down stone aggregates of approved quality, well graded, washed and screened including cost of transport of all materials to site., mixing, laying, vibrating, curing etc. complete but excluding the cost of reinforcement and formwork as per drgs., specifications & directions in superstructure and foundation with :

Concrete mix 1: 2 : 4

Cum

Brickwork in foundation, superstructure and plinth with Bricks of Class designation 50 & cement mortar with coarse sand as specified below including supply & carriage of all materials to site, scaffolding & curing complete as per drg., specifications and directions :

With 1: 4 cement mortar

Cum

Cement plaster to walls & R.C.C. structures including all necessary materials, scaffolding, curing, rounding off, chamfering etc. complete at all heights as per drg, spec. & directions.

20 mm th. cement plaster

i) With mix 1:4 ( 1 Cement : 4 Coarse sand )

Sqm

12 mm th. cement plaster

i) With mix 1:4 ( 1 Cement : 4 Coarse sand )

Sqm

Fitting & Fixing G-I barbed wire conforming to IS:278- Type I, 4 barbs 75MM. Spacing to RCC posts or MS angle bend posts on a boundary wall with fixing arrangements already provided with the posts complete .(Supplying and fixing of post is to be paid separately & payment is to be made on the basis of the length per line of barbed wire fixed)

380

Straining and fixing chain link fencing conforming to IS:2721, made of 8 SWG Galvanised wire of 50 mm. Square mesh and upto 2.0 M high with the posts already fixed in position with MS flats of size 40 mm x 6 mm with holes of 100 mm. Spacing for MS bolts and nuts 10 mm. Dia and 50 mm long all complete as per drg. / direction (posts shall be at a spacing of 3 meters apprcx. & will be subject to variation on the direction of the Engineer-in-Charge).

200

Transporting, assembling, erecting, fitting & Fixing in position of MS angle post & struts for fixing chain-link fencing, barbed wire over boundary wall, cable trays and racks, all embedded steelwork such as foundation materias, inserts, clamps, stops bolts fan hooks etc. in concrete & masonry works, and miscellaneous structures etc. complete with a coat of primer complete as per drgs. specification & directions.

4.5

Prepare the surface & painting (two or more coats) synthetic enamel paints of approved quality and shade (J&N, Berger, Asian Paints) on new work over and including a coat of ready mixed red oxide sinc chromate primer of approved brand & manufacturer in steel work inclouding cost of all materials, scaffolding etc. complete.

Sqm

PROJ/DVC-BIADA/072

5-May-08

Construction of Road :-

Single(1)

14-May-08

3 (Raj Construction, Sri Shivshakti Enterprises, S.R. Enterprises)

nil

Lowest tender(L1)

BLL/PROJ/DVC-BIADA/ORD/80 Dt. 13.08.08

Raj Construction

1358700

60 days

Preparation of subgrade by excavating earth (in all sorts of soil) to an average of 225 mm depth (box cutting), dressing to camber and grades and consolidation with road roller including making good the undulation etc. & disposal of surplus earth upto 50 metres.

2200

Sqm

Consolidation of subgrade with power road roller of 8 to 12 tonnes capacity including making good the undulations etc. with earth or quarry spoils etc. & rerolling the subgrade

2200

Sqm

Supplying and stacking of 90 mm to 45 mm graded stone aggregate at site

400

Cum.

Laying water bound macadam base course with 90 mm to 45 mm size stone aggregate including stone screening with 13.2 mm size and blinding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete (payment for stone aggregate, screenings, kankar, morum and red bajri etc. to be made separately)

400

Cum.

Supplying and stacking of moorum at site

Cum.

Supplying and stacking of 13.2 mm nominal size (type A) stone screenings / chipping at site

Cum.

Brick edging with bricks laid length wise with half brick depth including excavation refilling and disposal of surplus earth lead upto 50 metres.

900

2.5 cm premix carpet surfacing with 2.25 cum. And 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm. And 52 kg and 56 kgs of hot bitumen per cum. of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen with paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70 grames per kg of asphalt, including consolidation with road roller of 6 to 9 tonne capacity etc. complete; (tack coat to be paid for separately).

2200

Sqm

Providing and applying tack coat using bitumen emulsion (Rapid Setting) complying with IS 8887 - 1995, on W.B.M @ 0.4 kg/sqm Spraying the bitumen emulsion with mechanically operated spray unit, cleaning and preparing the existing road surface as per specifications.

2200

Sqm

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade 80 / 100 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete

2200

sqm

Providing and laying 50 mm compacted thickness Bitumen Penetration Macadam with hard coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. with bitumen of suitable penetration grade (with paving asphalt 80/100 @ 50 kg/10 sqm) including required key aggregate as specified, spreading coarse aggregate with the help of self propelled / tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader comlete including consolidation with raod roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surfaceaccuracy.

2200

Sqm

Earth Working filling including dressing, watering & ramming in layers not exceeding 15 cm.in embankment etc. formed by excavated earth

1500

Cum.

PROJ/NASL/064

5-May-08

Erection of 33KV Over Head Line :-

Single(1)

12-May-08

3 (Hi-Tech Electro Mechanical, Associated Engineers, Maa Bhawani Construction)

nil

Lowest tender(L1)

BLL/PROJ/NASL-R/ORD/056 Dt. 22.05.08

Hi-Tech Electro Mechanicals

458540

25 days

Fitting and Fixing of GI Sections with angle, channel, V Bracket, bracing, cradle guard, nuts, bolts, etc. for 33 KV transmission lines on Rail Pole

8500

Fitting and Fixing of Disc insulator set (4 nos.) including Hardware fittings with 'U' Bolted/4 Bolted type clamp for ACSR conductor (for transmission lines)

No.

1540

Fitting and Fixing of Post Insulator (set, for suspension) for ACSR conductor

stack

Fitting and Fixing of Guy insulator for 33KV GI Stay Wire in transmission lines

No.

200

Stringing, jumpering, testing and charging of ACSR Panther conductor (CKt, 3 wire conductor)

3.8

Installations of Earth spike for transmission line Rail Poles including connection of GI Flat/wire.

No.

Fitting and fixing of GI Stay wire from clamp of rail poles to HT stay set

3000

Fitting and fixing of GI Wire for earthing and cradle guard

2000

Laying of 50x6 GI Flat for earthing including fitting of 1 no. bolt in each rail pole

mtr.

200

Fitting and fixing of Barbed wire in fencing including supply of barbed wire.

500

Fitting and fixing of Danger Board including supply of Danger board

33 KV

No.

415 V

No.

PROJ/NASL/065

5-May-08

Miscellaneous Civil works :-

Single(1)

12-May-08

Supply & fixing of Rolling Shutter (MS - 3m x 2.7m)

no.

Double leaf glazed door, glass thickness - 6mm (size : 1.8m x 2.3m)

no.

Al. framed single leaf glazed door, glass thickness - 6 mm (size : 1m x 2.3m)

no.

Al. framed glazed openable window (size : 0.9m x 1.4m)

no.

Al. framed glazed fixed louvers (size : 0.6m x o.6m)

no.

Supply, fitting and fixing of security fencing including painting [as per approved drawing, (PVC quoted wire mesh will be supplied by BLL)]

kg.

800

Anti weed treatment for substation

Supply and Spreading of gravel in switchyard (Depth : 150mm)

sq.mtr

1000

Providing and applying of resin bonded granular coating to the exterior surface of the entire control room building

sq.mtr

350

Earth work in excavation of foundation in all types of soil including removing or staking the soil within a lead of 75 mtrs and providing necessry trimming necessary dewatering

cu. Mtr

250

Providing and casting plain cement concrete (1:4:8) with graded stone chips (20mm size) in all types of foundation including side shutting complete in all respects as per the instruction of Site In Charge.

cu. Mtr

Providing and casting reinforcement cement concrete (RCC) nominal mix (1:1.5:3) without shuttering and reinforcement.

cu. Mtr

Providing, fitting and fixing of roof tiles on sub station building including base concreting, leveling and final finishing.

sq.mtr

130

PROJ/NASL/066

5-May-08

Miscellaneous works at site :-

Single(1)

12-May-08

3 (Maabhawani Construction, Hi-Tech Electro Mechanicals, Subodh Kumar Singh Construction)

nil

Lowest tender(L1)

BLL/PROJ/NASL-R/ORD/058 DT. 23.06.08

Hi-Tech Electro Mechanicals

285185

25 days

Unloading of materials from transporters' truck/trailor and shifting to site/site stores

per truck

Unloading of materials from transporters' truck/trailor and shifting to site/site stores

per trailor

Fabrication, supply, fixing of wooden doors with all fittings for bathroom as per NESCL/NASL/BLL Specifications.

sets

Supply of foundation bolts for transformer including welding of MS Items as required at site (for transformers of 10 MVA).

sets

Fabrication, fixing, cleaning/de-rusting, painting (2 coats of primer and 1 coat of finished paint) on MS angles at cable trench / other areas of substation as required as per BLL/NASL/NESCL Specifications.

for Fabrication

for Painting

mtr.

250

Fitting and fixing of various type of clamp and connector for sub station and Namkum Grid

nos.

219

Preparation of Joint Pit/chamber as per direction of BLL Site In Charge

nos.

Erection, testing and commissioning of end termination kit of following cable

19/33KV End Termination Kit suitable for 1CX 800sq mm XLPE insulated Al. Wire armoured cable (Outdoor type) , O.D: 68 (+ / -) 3mm, Make of Cable- Torrent

nos.

6.35/11KV End Termination Kit suitable for 1CX 1000sq mm XLPE insulated Al. Wire armoured cable (Indoor type) , O.D: 61 ( + / -) 3mm Make of Cable-Torrent

nos.

6.35 / 11KV End Termination Kit sutable for 3C x 185 sq mm XLPE insulated Al. Wire armoured cable(Indoor type)

nos.

6.35 / 11KV End Termination Kit sutable for 3C x 185 sq mm XLPE insulated Al. Wire armoured cable(outdoor type)

nos.

Jointing, testing and commissioning of following Jointing kit (supply of kits is in BLL's scope)

19/33KV Jointing Kit suitable for 1CX 800sq mm XLPE insulated Al. Wire armoured cable (Outdoor type) , O.D: 68 ( +/ -) 3mm, Make of Cable-Torrent

nos.

Supply and fixing of 150mm GI Pipe for end pole structure

mtr.

Supply and fixing of hume pipe (NPL) of sizes :-

450 mm

mtr.

300 mm

mtr.

CN-SGW

BLL/539

5-May-08

LM6 TOP PLATE

NOS

178

12.5.08

N/A

L(1)

HR/44213, DT.28.5.08

N'MACCO (INDIA) INDUSTRIES

11.79

MAR'2009

HR/AD/ 006

06.05.2008

Providing service to Guests & Maintenance of Transit Accommodation at Kolkata,

27.05.2008

PROJ/DVC-BIADA/073

7-May-08

1.0 ILLUMINATION SYSTEM

Single(1)

16-May-08

1) Trio Engineers 2) Eastern Electric Corp. 3) Electro mechanical India

NIL

Lowest (L1)

BLL/PROJ/DVC-BIADA/ORD/070, dt. 07.06.08

Trio Engineers

64709

4-6 weeks from the receipt of approved drg.

a) Outdoor type hinged door Main Lighting Distribution Board(MLDB) complete with TPN/SPN MCCB for control room/Sw.yard as per detail configuration enclosed

Sets

b) Outdoor type hinged door Power Distribution Board(PDB) complete with the following main equipments (for welding machine)

sets

I) 63 Amp. TPN SFU with fuse(Incomer)

ii) 63 " 4-pin and earth socket outlet and plug along with 63 Amp. SFU

CNMBW

9724/AS

08-05-08

REWINDING OF NEUTRAL REACTOR AS PER SAMPLE.

SINGLE

14-05-08

MILAP ELECTRICALS

NIL

L-1

MB/11930/ER DT.09-06-08.

MILAP ELECTRICALS

39500.00

WITH IN 30 DATS

CNMBW

9710/JC

07-05-08

LAB. CH. FOR FORMING & TAPING OF ARM. COILS. 250GMS. TO 1 KG.

2000

SINGLE

14-05-08

1.BABCO ELECTRICALS. 2.CHILLMECH TECHNO PVT. LTD. 3.MA-KALI ENG. WORKS. 4.UNIQUE ELECTRICALS

NIL

L - 1

MB/12043/ER (RC). dt.16-07-08 MB/12042/ER (RC) DT.16-07-08

1.BABCO ELECTRICALS 2.CHILLMECH TECHNO PVT. LTD.

52800.00 . . 79200.00

THIS IS A RATE CONTRACT ORDER WHICH WILL BE VALIED UP TO 30/07/2009 AND IT WILL BE REVIEWED EVERY 3 MONTHS.

CNMBW

9711/JC

07-05-08

LAB. CH. FOR FORMING & TAPING OF ARM. COILS. 1 KG TO 2 KG.

2500

SINGLE

14-05-08

1.BABCO ELECTRICALS. 2.CHILLMECH TECHNO PVT. LTD. 3.MA-KALI ENG. WORKS. 4.UNIQUE ELECTRICALS

NIL

L - 1

MB/12077/ER (RC). dt.23-07-08 MB/12047/ER DT.23-07-08

1.BABCO ELECTRICALS 2.CHILLMECH TECHNO PVT. LTD.

35250.00 . . 82250.00

THIS IS A RATE CONTRACT ORDER WHICH WILL BE VALIED UP TO 30/07/2009 AND IT WILL BE REVIEWED EVERY 3 MONTHS.

CNMBW

9712/JC

07-05-08

LAB. CH. FOR FORMING & TAPING OF ARM. COILS. 2KG TO 3 KG.

1500

SINGLE

14-05-08

1.BABCO ELECTRICALS. 2.CHILLMECH TECHNO PVT. LTD. 3.MA-KALI ENG. WORKS.

NIL

L - 1

MB/12072/ER (RC). dt.23-07-08 MB/12073/ER (RC) DT.23-07-08 MB/12074/ER (RC) DT.23-07-08.

1.CHILLMECH TECHNO PVT. LTD. 2.MA-KALI ENGINEERING WORKS. 3.BABCO ELECTRICALS

33000.00 . . 16500.00 . . 16500.00

THIS IS A RATE CONTRACT ORDER WHICH WILL BE VALIED UP TO 30/07/2009 AND IT WILL BE REVIEWED EVERY 3 MONTHS.

CNMBW

9713/JC

07-05-08

LAB. CH. FOR FORMING OF MP COIL. UPTO 10KGS

400

SINGLE

14-05-08

1.BABCO ELECTRICALS. 2.CHILLMECH TECHNO PVT. LTD. 3.MA-KALI ENG. WORKS. 4.UNIQUE ELECTRICALS

NIL

L - 1

MB/12046/ER(RC). dt.16-07-08 MB/12047/ER DT.16-07-08

1.CHILLMECH TECHNO PVT. LTD. 2.MA-KALI ENGINEERING WORKS.

18000.00 . . 27000.00

THIS IS A RATE CONTRACT ORDER WHICH WILL BE VALIED UP TO 30/07/2009 AND IT WILL BE REVIEWED EVERY 3 MONTHS.

CNMBW

9714/JC

07-05-08

LAB. CH. FOR FORMING OF MP COIL. 10-20KGS.

1000

SINGLE

14-05-08

1.BABCO ELECTRICALS. 2.CHILLMECH TECHNO PVT. LTD. 3.MA-KALI ENG. WORKS. 4.UNIQUE ELECTRICALS

NIL

L - 1

MB/12046/ER(RC). dt.16-07-08 MB/12047/ER DT.16-07-08

1.CHILLMECH TECHNO PVT. LTD. 2.MA-KALI ENGINEERING WORKS.

33600.00

WITHIN 14 DAYS

CNMBW

9715/JC

07-05-08

LAB. CH. FOR FORMING OF MP COIL,STRIP COND. 10-20KGS.

800

SINGLE

14-05-08

1.CHILLMECH TECHNO PVT. LTD. 2.MA-KALI ENG. WORKS. 3.UNIQUE ELECTRICALS

NIL

L - 1

MB/12030/ER(RC). dt.11-07-08

MA-KALI ENGINEERING WORKS.

33600.00

WITHIN 14 DAYS

CNMBW

9716/JC

07-05-08

LAB. CH. FOR FORMING OF MP COIL,STRIP COND. 20-40KGS.

3500

SINGLE

14-05-08

1.CHILLMECH TECHNO PVT. LTD. 2.MA-KALI ENG. WORKS. 3.UNIQUE ELECTRICALS

NIL

L - 1

MB/12044/ER(RC). dt.16-07-08

MA-KALI ENGINEERING WORKS.

105000.00

WITHIN 14 DAYS

CNMBW

9717/JC

07-05-08

LAB. CH. FOR FORMING OF MP COIL, 40-60KGS.

2000

SINGLE

14-05-08

1.CHILLMECH TECHNO PVT. LTD. 2.MA-KALI ENG. WORKS. 3.UNIQUE ELECTRICALS

NIL

L - 1

MB/12051/ER (RC). dt.18-07-08 MB/12050/ER (RC) DT.18-07-08

1.MA-KALI ENGINEERING WORKS 2.CHILLMECH TECHNO PVT. LTD.

60000.00 . . 60000.00

THIS IS A RATE CONTRACT ORDER WHICH WILL BE VALIED UP TO 30/07/2009 AND IT WILL BE REVIEWED EVERY 3 MONTHS.

CNMBW

9718/JC

07-05-08

LAB. CH. FOR FORMING OF MP COIL,60-80 KGS.

1500

SINGLE

14-05-08

1.CHILLMECH TECHNO PVT. LTD. 2.MA-KALI ENG. WORKS. 3.UNIQUE ELECTRICALS

NIL

L - 1

MB/12052/ER(RC). dt.18-07-08

MA-KALI ENGINEERING WORKS.

79500.00

THIS IS A RATE CONTRACT ORDER WHICH WILL BE VALIED UP TO 30/07/2009 AND IT WILL BE REVIEWED EVERY 3 MONTHS.

CNMBW

9719/JC

07-05-08

LAB. CH. FOR FORMING OF IP COIL. UPTO 5KGS

350

SINGLE

14-05-08

1.BABCO ELECTRICALS. 2.CHILLMECH TECHNO PVT. LTD. 3.MA-KALI ENG. WORKS. 4.UNIQUE ELECTRICALS

NIL

L - 1

MB/12138/ER (RC). dt.13-08-08 MB/12139/ER (RC) DT.13-08-08

1.MA-KALI ENGINEERING WORKS 2.CHILLMECH TECHNO PVT. LTD.

12250.00 . . 12250.00

THIS IS A RATE CONTRACT ORDER WHICH WILL BE VALIED UP TO 30/07/2009 AND IT WILL BE REVIEWED EVERY 3 MONTHS.

CNMBW

9720/JC

07-05-08

LAB. CH. FOR FORMING OF IP COIL.5-15 KGS

1300

SINGLE

14-05-08

CNMBW

9721/JC

07-05-08

LAB. CH. FOR FORMING OF IP COIL.15-25 KGS

1800

SINGLE

14-05-08

1.CHILLMECH TECHNO PVT. LTD. 2.MA-KALI ENG. WORKS. 3.UNIQUE ELECTRICALS

NIL

L - 1

MB/12031/ER(RC). dt.11-07-08

MA-KALI ENGINEERING WORKS.

57600.00

WITHIN 14 DAYS

CNMBW

9722/JC

07-05-08

LAB. CH. FOR FORMING OF IP COIL. 25-40 KGS

1000

SINGLE

14-05-08

1.CHILLMECH TECHNO PVT. LTD. 2.MA-KALI ENG. WORKS. 3.UNIQUE ELECTRICALS

NIL

L - 1

MB/12136/ER (RC). dt.13-08-08

MA-KALI ENGINEERING WORKS.

25000.00

THIS IS A RATE CONTRACT ORDER WHICH WILL BE VALIED UP TO 30/07/2009 AND IT WILL BE REVIEWED EVERY 3 MONTHS.

CNMBW

9723/JC

07-05-08

LAB. CH. FOR FORMING & TAPING OF ARM. COILS

300

SINGLE

14-05-08

CN-SGW

BLL/540

9-May-08

ELECTRODE

NOS

33253

17.5.2008

N/A

L(1)

HR/44240,DT.31.5.08

SIMPLEX INDIA MARKETING

1.68

JUN'08

HR/44241.DT.31.5.08

ASSOCIATED INDUSTRIES & TRADING

0.5

AUG'08

CN-ADM

AD/ENQ/465

8-May-08

SATIONERY ITEMS (XEROX PAPER)

23-May-08

CN-ADM

AD/ENQ/470

12-May-08

SHIFTING OF HIGH VOLTAGE TEST ROOM AT HRW

27-May-08

PROJ/DVC-BIADA/074

14-May-08

CONTROL ROOM FINISHING CIVIL WORKS

Single(1)

20-May-08

3 (Arun Sharma, Sarita Interiors, Mahto Enterprise)

nil

Lowest tender(L1)

BLL/PROJ/DVC-BIADA/ORD/068 Dt. 28.05.08

Arun Sharma

572410

60 days

Brickwork in foundation, plinth & Superstructure with Bricks of Class designation 50 & cement mortar with coarse sand as specified below including supply & carriage of all materials to site, scaffolding & curing complete as per drg., specifications and directions :

With 1: 4 cement mortar

Cum

With 1: 6 cement mortar

Cum

Half brick Masonry with Bricks of Class designation 50 in cement mortar mix 1 : 4 with coarse sand including supply, carriage, scaffolding, curing etc. complete in superstructure.

Sqm

Extra for providing & placing in position 2 nos. 6 mm dia MS bars at every 3rd course of half brick masonry with F.P.S. Bricks of Class designation 50.

Sqm

Cement plaster to walls & R.C.C. structures including all necessary materials, scaffolding, curing, rounding off, chamfering etc. complete at all heights as per drg, spec. & directions.

20 mm th. cement plaster

i) With mix 1:4 ( 1 Cement : 4 Coarse sand )

200

Sqm

ii) With mix 1:6 ( 1 Cement : 6 Coarse sand )

2300

Sqm

12 mm th. cement plaster

i) With mix 1:4 ( 1 Cement : 4 Coarse sand )

200

Sqm

ii) With mix 1:6 ( 1 Cement : 6 Coarse sand )

2750

Sqm

Extra over item (25) for providing, adding & mixing thoroughly water-proofing reagent (such as cico, acco proof, Impermo etc.) in cement plaster in proportion recommended by the manufacturers:

i) 12 mm cement plaster 1 : 4

Sqm

ii) 20 mm cement plaster 1 : 4

Sqm

6 mm thick plastering of ceiling with cement mortar 1 : 3 ( 1 Cement : 3 Fine sand ) to exposed faces of R.C.C. slabs, sides & soffits of beams in all floors and at all heights inclusive of cost of all materials.

250

Sqm

Neat cement punning about 1.5 mm. Thick in wall, dado, windowsill, floor, drain etc.

200

Sqm

25 mm. thick a.rtificial grey patent stone in flooring, skirting, dado etc. with mix. 1:2:4( 1 cement : 2 Coarse sand : 4 graded stone aggregates ) with 12.5 mm nominal size stone aggregates with a floating coat of neat cement slurry to be laid in panels not exceeding 1.0 sqm. in area or as directed including rounding off at corners.

Sqm

40 mm. thk. Mosaic flooring to be laid in panels of size 600 mm. x 600 mm. With marble chips rubbed & polished to granolithic finish having 31 mm. thk. Concrete (1 Cement: 2 Coarse Sand: 4 graded stone aggregates of 13mm. & down) as under layer. Top layer is 9 mm. thk. & consists of white and / or black and/or coloured marble chips of 7 mm. to 4 mm. (graded) laid in white & grey cement (1:1) in the proportion of cement marble powder mix 3: 1 (3 cement: 1 Marble powder) by weight in proportion 4:7 (4 Cement marble powder: 7 Marble chips) by volume including cement slurry etc. complete as per specifications, supply of all materials & direction of Engineer-in-Charge.

100

Sqm

Precast terrazzo tiles of 22 mm. thk. In floors & dado With graded marble chips of size upto 13 mm. in cement with mosaic coat of 6 mm. laid on 20 mm. thk. bed of cement mortar ( 1 Cement : 4 Coarse sand ). The mosaic coat shall consist of marble chips (6 mm. to 3 mm. Graded), marble dust & cement in the proportion 5:1:3 with grey & white cement (1:1). The rate is inclusive of filling the jts. with appropriate cement slurry, rubbing, polishing and supply of all materials etc. in floors & skirting.

220

Sqm

40 mm thick artificial flooring to be laid in panels not exceeding 1.0 sqm. in area & will consist of two parts 13 mm. thick hard topping as one part over 27 mm. thk. Screeded bed as the other part. The screeded bed will consist of a mix of cement concrete (1:1:2) with crushed stone aggregates 10 mm. & down size. This shall be mixed, placed thoroughly tamped with a grill hammer, floated & screeded to receive the 13 mm.thk. hard topping. which will be applied while the screeded bed is still wet. This consists of 1 part of cement ironite by mixture (1 part ironite to 4 parts of cement by wt.) to 2 parts of well graded approved crushed granite of maximum 6 mm. size. Water shall be added after mixing the aggregate, placing, tamping, floating & trowelling being done in accordance with manufacturer’s recommendations. Care shall be taken not to over-trowel until the initial set has taken place. Curing shall be done by covering with wet sacking for 2 days & then by ponding 50 mm. water for 2 weeks.

Sqm

18 mm. thick marble chips skirting or dado (heights as per approved drg.), stairs and window sill rubbed & polished to granolithic finish, under layer 12 mm thk. cement plaster (1:3) & top layer 6 mm thk. marble chips of approved colour of 4 mm. & down gauge laid cement marble powder mix 3:1 ( 3 Cement : 1 Marble powder ) by weight in proportion of 4 :7 ( 4 Cement marble powder : 7 Marble chips ) by volume in grey & white cement 1:1 including rounding off junctions with the floor including cost of all materials complete.

Sqm

Fixing 40 mm. Wide & 4 mm. Thick glass strips in joints of terrazzo / cement concrete floors.

300

Fixing of glazed tiles of “Johnson” or approved equivalent quality and shade of 5 mm. Thick conforming to IS : 13753 in skirting and dado on 12 mm. thick cement plaster (1:3) including applying cement slurry and joined with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade including corner angles and beading all complete as per direction.

Sqm

Laying in position 10 mm. Thick Acid / Alkali resistant tiles of approved make & colour in flooring / trench / skirting etc. conforming to IS : 4457 in 6 mm bedding and jointing of potassium silicate base mortar as per IS 4832 ( Pt-I) and pointing of 6 mm wide x 12 mm deep joints with polyester / Epoxy based mortar. The concrete surface shall be treated with 2 (two) coats of Bitumastic primer before laying the tiles.

Sqm

Prepare surface & supply Two or more coats of cement colour on new work such as SNOWCEM – Plus/ DUROCEM EXTRA of approved colour & shade on exterior faces of walls, columns, beams etc. at all heights including the rough cleaning & smoothening of surface, cost of all materials, curing, scaffolding etc. complete

2500

Sqm

White washing with lime (three or more coats) on new work to give an even shade at all heights including supply of all materials, scaffolding etc. complete.

Sqm

Colour washing on new work ( two or more coats ) with a base coat of white washing with lime of approved shade to give an even shade at all heights including scaffolding, cleaning & smoothening of surface thoroughly as per directions complete, with supply of all materials.

Sqm

Distempering with plastic or acrylic emulsion paint (two or more coats) of approved quality, shade & colour (J&N, Berger, Asian Paints) over and including a base coat of cement primer of approved quality to give an even shade including preparation of surface with plaster of paris punning of 2.0mm thickness over plastered surface to prepare the surface even & smooth etc. complete at all heights with supply of all materials. (The rate is inclusive of any scaffolding from ground or plinth)

250

Sqm

Distempering with dry distemper (two or more coats) of required shade & colour on new work over and including priming coat of whiting to give an even shade with cost of all materials (Berger, Jenson & Nicklonson, Asian Paints) at all heights, scaffolding etc. complete.

Sqm

Supplying, providing & painting two or more coats of acid proof paint of approved brand & manufacturer of required colour to give an even shade on the walls, ceiling , doors, etc. including the cost of materials, labour, scaffolding etc. complete as per specification and direction.

Sqm

Prepare the surface & painting (two or more coats) synthetic enamel paint of approved quality and shade ( J&N, Berger, Asian Paints) on new work over and including a coat of ready mixed red oxide zinc chromate primer of approved brand & manufacturer in steel work including cost of all materials, scaffolding etc. complete.

Sqm

Prepare the surface & painting (two or more coats) Aluminium paint of approved quality and shade ( J&N, Berger, Asian Paints) on new work over and including a coat of ready mixed Aluminium primer of approved brand & manufacturer in steel work including cost of all materials, scaffolding etc. complete.

Sqm

PROVIDING, FITTING, FIXING FALSE CEILING, AL. DOOR, ETC

Providing, fixing & fitting at site anodised aluminium natural colour matt finished false ceiling frame work in approx. 60cm x 60cm exposed grid consisting of M/s. INDAL make aluminium T sections as main members (section 3121) 36.5mm x 23.5mmx1.57mm (minimum), cross members & wall angles (section 3122) 23.5mmx23.8mmx1.57mm (minimum) etc. complete with supply & fixing necessary 5mm (3/16 inch) dia bright bar suspenders treated with anti corrosive paint, special - 150mm. Long adjustable nuts & washers, fixing pins etc. including supplying & fixing 13mm (1/2inch) thick white semi-perforate Gypsum board of adequate size.

140

Sqm

Providing, fitting & fixing aluminium door (openable) with best quality fittings & fixtures made of anodised (12 - 15 ) natural matt finished extruded section of M/s. INDAL, glass panes of 5.5mm thick (weight not less than 13.75 kg/sqm) & all fastenings etc., with built in door closer (floor springs hydraulically operated) complete as per drgs., specifications & directions for all heights. The door will consists of outer frame section 9221 (101.5mm x 44.5mm x 2.5mm), Door Vertical 9202 (50mm x 44.5mm x 2.5mm), Door Top 9201 (50mm x 44.5mm x 2.5mm), Door middle 9219 (50mm x 44.5mm x 2.5mm), Door bottom 9200 (100mm x 44.5mm x 2.5 mm), and with necessary approved type rubber gasket, brass lock, push plate and with all other accessories. The doors will be fixed in walls with 16 x 3.15mm. 10 cm long embedded in cement concrete blocks 15 x 10 x 10 cm of proportion (1:3:6) or with wooden plugs and screws and with fixing clips or with bolts and nuts as required.

Sqm

CNMBW

9734/JC

14-05-08

1.LAB. CH. FOR REWINDING OF AC STATOR.

SINGLE

21-05-08

1. THR ELECTRO MECH INDUSTRIES

NIL

L - 1

MB/12156/ER Dt.19-08-08

1. THR ELECTRO MECH INDUSTRIES

294000.00

WITHIN 10 DAYS.

2.LAB. CH. FOR ARMATURE COIL KAYING, COMM. U/C

3. LAB. CH. FOR REWINDING OF ROTOR.

CNMBW

9735/JC

14-05-08

1.LAB. CH. FOR FORMING OF I.P COIL & ASSY.

SINGLE

21-05-08

1. THR ELECTRO MECH INDUSTRIES

NIL

L - 1

MB/12154/ER Dt.19-08-08

1. THR ELECTRO MECH INDUSTRIES

########

WITHIN 10 DAYS.

2.LAB. CH. FOR FORMING OF M.P COIL & ASSY.

3. LAB. CH. FOR ASSY & DISMEN TALED OF DC MOTOR.

ENQ/BLL/2008-09/4

14.05.2008

Serial Cable - 6 Core

mtr.

26.05.2008

Ava Software, Forte, Microsyst, Myrinda Systems

Nil

SYS/NET/2008-2009/1 Dated 10.06.2008

Forte

This is a rate contract which will be valid for one year starting from 11.06.2008 .No price revision will be allowed during this period .

Serial Cable - 8 Core

mtr.

CAT-5 UTP Cable ( Make- SYSTIMAX/AMP ) – box of 1000 ft.

Box

Lucent Mount Cord –3 ft ( Make- SYSTIMAX/AMP )

No.

Lucent Mount Cord –7 ft ( Make- SYSTIMAX/AMP )

Lucent Mount Cord –15 ft ( Make- SYSTIMAX/AMP )

CAT- 5 Information Outlet with Surface Mount Box

Ethernet Card 100 MBPS (D- LINK)

RJ45 connectors( AMP/D-LINK)

Male to Female Connector

Female to Female Connector

CAT-5 24 Port Patch Max Panel

8 Port 10/100 Mbps Unmanaged Switch ( Make- 3 COM)

24 Port 10/100 Mbps Unmanaged Switch ( Make- 3 COM)

STP Cable

STP Connector

RJ-45 Connector

LTS to Terminal Cord

Rosset Box

RJ – 11 Cord

Cable laying Charges including laying material(up to 4 cables)

mtr.

Cable laying Charges including laying material( more than 4 cables)

mtr.

The lowest bidder for each item will receive an order based on this annual rate contract. At different point of time based on this rate contract, orders will be placed specifying the quantity and job required which need to be executed within specified time frame as will be mentioned in such orders.

CN-SGW

BLL/541

13-May-08

TOROIDAL CORE

NOS

N/A

L(1)

HR/44257,DT.4.6.08

VARDHAMAN STAMPINGS

1.96

MAR'09

HR/44258

SAI DARSHAN ELECTRICALS

3.98

HR/44259

SINEWAVE ELECTRONIKCS

9.78

HR/44260

VILASH TRANSCORE

0.44

BLL/542

13-May-08

FASTENERS

NOS

142107

19.5.08

N/A

L(1)

HR/44270,DT.6.6.08

D.K.HARDWARE MART

0.6

OCT'08

HR/44271

AKAY ENTERPREISES

1.26

HR/44272

COASTAL BEARING CENTRE

0.5

BLL/543

14-May-08

FASTENERS

NOS

15492

20.5.08

N/A

L(1)

HR/44268,DT.6.6.08

D.K.HARDWARE MART

0.33

OCT'08

HR/44269

AKAY ENTERPRISES

0.49

BLL/544

14-May-08

PVC FLEXIBLE CU.WIRE

MTR

114770

18.5.08

N/A

L(1)

HR/44326,DT.19.6.08

ECKO CABLES (P) LTD.

2.4

OCT'08

HR/44327

BHAGIRATH ELECTRIC CO

1.38

HR/44328

UNIVERSAL TRADE CENTRE

8.88

BLL/545

15-May-08

INSULATING RING

NOS

197737

22.5.08

N/A

L(1)

HR/44273,DT.7.6.08

BHAGIRATH ELECTRIC CO

0.66

OCT'08

HR/44274

KSE ELECTRICALS

1.99

BLL/546

15-May-08

FLAT PIN

NOS

68335

22.5.08

N/A

L(1)

HR/44322,DT.18.6.08

ELECTROLUG & TERMINALS

0.74

OCT'08

HR/44323

A.B.ENTERPRISE

0.32

CNMBW

9742/AS

15-05-08

MFG OF NEW SILVER BEARING COMMUTATOR AS PER SAMPLE

SINGLE

22-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.DOLPHIN ELECTRIC (INDIA).

NIL

L - 1

MB/11922/ER Dt.02-06-08.

DOLPHIN ELECTRIC (INDIA)

448800.00

6 TO 7 WEEKS

CNMBW

9741/AS

15-05-08

MFG OF NEW COMMUTATOR AS PER SAMPLE / DRAWING

SINGLE

22-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.DOLPHIN ELECTRIC (INDIA).

NIL

L - 1

MB/11932/ER Dt.09-06-08.

THE BENGAL COMMUTATOR WORKS.

279240.00

2 NOS WITHIN 20 DAYS. BALANCE ON REQUEST.

CNMBW

9744/AS

15-05-08

MFG OF NEW COMMUTATOR AS PER SAMPLE. SEG:150

SINGLE

22-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.DOLPHIN ELECTRIC (INDIA).

NIL

L - 1

MB/11921/ER Dt.02-06-08.

DOLPHIN ELECTRIC (INDIA)

210120.00

6 TO 7 WEEKS

CNMBW

9743/AS

15-05-08

MFG OF NEW SILVER BEARING COMMUTATOR AS PER SAMPLE

SINGLE

22-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.DOLPHIN ELECTRIC (INDIA).

NIL

L - 1

MB/11923/ER Dt.02-06-08.

DOLPHIN ELECTRIC (INDIA)

397800.00

5 TO 7 WEEKS

CNMBW

9736/AS

14-05-08

KAPTON COVER COPPER COND. AS PER IS9148

350

SINGLE

21-05-08

PEARL INSULATIONS PVT. LTD.

NIL

L - 1

MB/11956/ER DT.13-06-08.

PEARL INSULATIONS PVT.LTD.

357272.00

WITHIN 3 WEEKS.

CNMBW

9737/AS

14-05-08

EN DGC CU COND (4.5+-.03X1.50+0.03) MM2, E2G1, H

250

SINGLE

19-05-08

1.PARAMOUNT CONDUCTORS LTD. 2.SWARNAGIRI WIRE INSULATIONS PVT. 3.SAGUN COPPER CONDUCTORS (P) LTD.

NIL

L - 1

MB/11903/ER dt.22-05-08

SAGUN COPPER CINDUCTORS (P) LTD.

142601.00

WITH IN 15 DAYS.

CNMBW

9740/AS

14-05-08

MFG OF SILVER BEARING COMMUTATOR OF 171 SEG.

SINGLE

21-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.COMMUTATOR MFG. 3.SAHNEY COMMUTATORS PVT. LTD.

NIL

L - 1

MB/11933/ER DT.09-06-08.

THE BENGAL COMMUTATOR WORKS.

########

3 NOS WITH IN 10 DAYS. BALANCE ON REQUEST.

ENQ/BLL/2008-09/5

15.05.2008

Mouse ( Serial & PS2 Port,USB )

mtr.

28.05.2008

Mouse Pad ( Thick)

No.

1.44" Floppy ( Box of 10 Nos. )

No.

DAT (4 - 8 GB)

No.

DAT (12 - 24 GB)

DLT DAT ( 40 - 80 GB )

Printer Sharer 2:1 with Cable

DAT Drive Cleaner

CD (One time Writable)

CD (One time Writable) with jewel Box

CD ( RW ) with jewel Box

DVD (One time Writable)

DVD (One time Writable) with jewel Box

DVD ( RW ) with jewel Box

Plastic Cover for CD

Power Chord ( 5 amp.)

Printer Cartridge

Deskjet Cartridge 1000 C (Colour)

Deskjet Cartridge 1000 C (Black)

Cartridge for Deskjet 200 (Black)

Cartridge for Deskjet Portable (Black)

No.

Cartridge for Deskjet 810 C

No.

Cartridge for Deskjet 710 C

No.

Cartridge for HP Laserjet 6L

No.

Cartridge for HP Laserjet 4L

No.

Cartridge for Laserjet Toner 1100

No.

Cartridge for HP Inkjet 1125 C ( Colour)

No.

Cartridge for HP Laserjet 1015

No.

Cartridge for HP Deskjet 5652(Black)

No.

Cartridge for HP Deskjet 5652(Colour)

No.

Cartridge for HP Inkjet 1180(Black)

No.

Cartridge for HP Inkjet 1180(Colour)

No.

Cartrideg for Canon Printer( s200spx)

No.

Cartrideg for Canon Printer( s200spx)

No.

Cartridge for Samsung 1520

No.

Cartridge for HP Business Inkjet 1200d

No.

Cartridge for HP Business Inkjet 1200d

No.

Cartridge for HP Business Inkjet 1200d

No.

Cartridge for HP Business Inkjet 1200d

No.

Cartridge for HP Business Inkjet 1200d

No.

Cartridge for HP Business Inkjet 1200d

No.

Cartridge for HP Business Inkjet 1200d

No.

Cartridge for HP Business Inkjet 1200d

No.

Cartridge for HP Business Inkjet 1200d

No.

Cartridge for HP Laserjet P2015d

No.

LIPI -T 6045

No.

OKI Ribbon 520/521 TVSE HD 6595

No.

Dot Matrix Ribbon for Printer HD 745

No.

Dot Matrix Ribbon with Ink Bank(136 col)

No.

Ink Bank

No.

Dot Matrix Ribbon(Epson FX/LX 1000)

No.

Printer Head / Cable

Epson FX-1000

No.

TVS HD-6595

No.

TVS MSP-155

No.

TVS MSP-245

No.

TVS MSP-345

No.

Wipro EX-1050

No.

Wipro EX-200+.

No.

Printer Head cable

No.

Printer Chord

No.

Refilling of Ribbon

No.

Epson FX/LX 1000 ( 15 Meter)

Orders( rate contract ) will be placed for each item seperately to the lowest bidder for a period of one year. However items will be procured throughout the year time to time specifying the quantity required .

CNMBW

9771/AS

16-05-08

NEW COMMUTATOR AS PER SAMPLE

SINGLE

21-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.DOLPHIN ELECTRIC (INDIA).

NIL

L - 1

MB/11931/ER Dt.09-06-08.

THE BENGAL COMMUTATOR WORKS.

309504.00

6 NOS WITH IN 10 DAYS. BALANCE ON REQUEST.

CNMBW

9762/AS

16-05-08

KAPTON COVER COPPER COND. AS PER IS9148. (2.2 X 4.9 )MM

150

SINGLE

22-05-08

PEARL INSULATIONS PVT. LTD.

NIL

L - 1

MB/11955/ER DT.13-06-08.

PEARL INSULATIONS PVT.LTD.

174999.56

WITHIN 3 WEEKS.

PROJ/NASL/067

17-May-08

Laying of single core x 1000 sq.mm Power Cable through prepared trench.

mtrs.

650

Single(1)

23-May-08

Providing and laying of bricks in two sides of underground cable trench for edge protection, as per drawing and instruction of BLL Site In Charge.

1100

Providing and fitting, fixing of 100mm dia Rain Water Pipes (PVC) including necessary fittings e.g. Tee, Bend, etc. for control room building as per the instruction of BLL Site In Charge.

mtrs.

Two coats of enamel paint over a coat of wood primer in wooden doors.

set

Net Cement plaster for various equipment foundations.

sq.m

Brickbat fillings and compaction (for plinth protection)

cu.m

Supply of wooden battery rack for 30V, 100AH Battery.

set

Supply of Wooden bench of standard size

set

CN-Adm

AD/ENQ/472

17-May-08

NEW LOCO SHED AT HRW

2-Jun-08

CNMBW

9773/AS

16-05-08

MFG OF SILVER BEARING COMMUTATOR OF 171 SEG. SEGMENT DIA: 235MM,RISER DIA 292MM. SEGMENT LENGTH:123MM RISER LENGTH: 14MM. NO OF SEGMENT : 171. SAMPLE WILL BE SUPPLY BY US. FABRICATED NEW STEEL HUB TO BE USED. MATERIAL: SILVER BEARING COPPER. COMMUTATOR SHOULD BE ASSEMBLED WITH BOTH SIDE 'V' RING

SINGLE

24-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.COMMUTATOR MFG. 3.SAHNEY COMMUTATORS PVT. LTD.

NIL

L - 1

MB/12087/ER DT.01-08-08.

THE BENGAL COMMUTATOR WORKS.

1138800.00

THIS IS A RATE CONTRACT ORDER WHICH WILL BE VALIED UP TO 30/07/2009 AND IT WILL BE REVIEWED EVERY 3 MONTHS.

CNMBW

9772/AS

16-05-08

MFG OF NEW COMMUTATOR AS PER SAMPLE/DRAWING. NO OF SEGMENT : 210.SEGMENT DIA: 335MM,RISER DIA 415MM. RISER WIDTH:20MM. SEGMENT LENGTH:147MM. CONDUCTIVITY OF COPPER SHOULD BE MORE THAN 99.95%. OLD BACK SIDE STEEL HUB TO BE SUPPLIED BY US. FRONT SIDE V RING TO BE NEW. TEST 1.SEG TOSEG: 700 VAC, SEG TO EARTH: 3. OKV AC. SPIN TEST AT 2200 RPM.

SINGLE

24-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.COMMUTATOR MFG. 3.SAHNEY COMMUTATORS PVT. LTD.

NIL

L - 1

MB/12088/ER DT.01-08-08.

THE BENGAL COMMUTATOR WORKS.

962580.00

THIS IS A RATE CONTRACT ORDER WHICH WILL BE VALIED UP TO 30/07/2009 AND IT WILL BE REVIEWED EVERY 3 MONTHS.

CNMBW

9783/AS

17-05-08

NEW COMMUTATOR WITH SILVER BEARING COPPER SEGMENT-205. MATT: SILVER BEARING COPPER. CONDUCTIVITY MORE THAN 99.95%. RISER WIDTH : 16 MM. SEG.OD : 250MM. SISER OD:330MM. SEG.LENGTH: 96MM. NO OF SEG. 205. OLD STEEL HUB TO BE USED.

SINGLE

24-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.COMMUTATOR MFG. 3.DOLPHIN ELECTRIC (INDIA). 4.SAHNEY COMMUTATORS PVT. LTD.

NIL

L - 1

MB/12041/ER DT.16-07-08.

THE BENGAL COMMUTATOR WORKS

231235.00

WITHIN 35 DAYS

CNMBW

9782/AS

17-05-08

NEW COMMUTATOR WITH ETP GRADE COPPER. SEG-185. NO OF SEG: 185. RISER DID : 335MM, RISER WIDTH: 20MM. SEG.DIA: 282 MM, SEG. LENGTH: 92MM. OLD STEEL HUB TO BE USED. OLD SAMPLE WILL BE SUPPLIED BY US. MATERIAL: ETP GRADE COPPER.

SINGLE

24-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.COMMUTATOR MFG. 3.DOLPHIN ELECTRIC (INDIA). 4.SAHNEY COMMUTATORS PVT. LTD.

NIL

L - 1

MB/12040/ER DT.16-07-08.

COMMUTATOR MFG.

274560.00

WITHIN 15 FOR EACH COMMUTATOR.

CNMBW

9781/AS

17-05-08

NEW COMMUTATOR WITH ETP GRADE COPPER. SEG-155. NO OF SEG: 155. SEG DIA : 190 MM. RISER DIA : 245MM, RISER LENGTH: 12MM. SEG. LENGTH: 80MM. OLD STEEL HUB TO BE USED. MATERIAL: ETP GRADE COPPER.

SINGLE

24-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.COMMUTATOR MFG. 3.DOLPHIN ELECTRIC (INDIA).

NIL

L - 1

MB/12125/ER DT.12-08-08.

COMMUTATOR MFG.

122304.00

This order is for Rate Contract from August'08 to July'08.

CNMBW

9780/AS

17-05-08

MFGM OF NEW COMMUTATOR AS PER SAMPLE. SEG: 177. MATERIAL : ETO COPPER. SEG.DIA: 315MM. SEG. LENGTH: 102MM. NO OF COMMUTATOR SEGMENT: 177 RISER DIA: 390 MM. RISER WIDTH: 20MM. OLD STEEL HUB TO BE REUSED.

SINGLE

24-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.COMMUTATOR MFG. 3.DOLPHIN ELECTRIC (INDIA).

NIL

L - 1

MB/12038/ER DT.16-07-08.

COMMUTATOR MFG.

249600.00

WITHIN 15 FOR EACH COMMUTATOR.

CNMBW

9779/AS

17-05-08

NEW COMMUTATOR WITH SILVER BEARING COPPER SEGMENT-185. SEG. DIA:335.MM RISER DIA: 390 MM RISER WIDTH: 15 MM. OLD STEEL HUB TO BE USED.

SINGLE

24-05-08

CNMBW

9778/AS

17-05-08

NEW COMMUTATOR WITH ETP COPPER -SEG:111. SEG. DIA: 235MM. RISER DIA: 275 MM. RISER LENGTH: 15MM. OLD STEEL HUB TO BE USED. MATERIAL : ETP COPPER.

SINGLE

24-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.COMMUTATOR MFG. 3.DOLPHIN ELECTRIC (INDIA).

NIL

L - 1

MB/12117/ER DT.03-09-08.

COMMUTATOR MFG.

162240.00

THIS ORDER IS AGAINST RATE CONTRACT OF COMMU. AND WILL BE REVIEWED BY US ON QUARTERLY BASIS

CNMBW

9777/AS

17-05-08

LAB. CH. FOR COMMUTATOR REMICA AS PER SAMPLR. NO OF SEG: 171. SEG DIA: 245 MM. SEG LENGTH: 100MM. RISER WIDTH: 25MM. RISER DIA: 29MM.

SINGLE

24-05-08

CNMBW

9776/AS

17-05-08

MFG OF SILVER BEARING COMMUTATOR, 230 SEG. SEG DIA : 337 MM. RISER DIA : 405 MM. RISER WIDTH : 22MM SEG. LENGTH: 165MM. NO OF SEG: 230. SILVER CONTAIN SHOULD BE MORE THAN 0.06%. OLD STEEL HUB TO BE USED. SAMPLE WILL BE SUPPLIED BY US. TEST: SEG TO SEG: 700 V AC,H.V. TEST, IR TEST,SPIN TEST AT 1000 RPM, 150 DEG CEN TEST CERTIFICATE OF SILVER BEARING COPPER, SPIN TEST, ELECTRICAL TEST WILL BE SUPPLIED BY PARTY.

SINGLE

24-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.DOLPHIN ELECTRIC (INDIA ).

NIL

L - 1

MB/12062/ER DT.23-07-08.

DOLPHIN ELECTRIC (INDIA)

637500.00

This is an order against RATE CONTRACT and will be reviewed by us on quarterly.

CNMBW

9775/AS

17-05-08

MFG OF SILVER BEARING COMMUTATOR AS PER SAMPLE. NO OF SEG:129. SEG. DIA: 260 MM. RISER DIA: 298 MM. SEG. LENGTH: 95 MM. RISER WIDTH: 15 MM. SILVER CONTAIN SHOULD BE MORE THAN 0.06%. SAMPLE WILL BE SUPPLIED BY US TO THE ELLIGIBLE CONTRACTOR. OLD STEEL HUB TO BE USED.

SINGLE

24-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.COMMUTATOR MFG. 3.DOLPHIN ELECTRIC (INDIA).

NIL

L - 1

MB/12039/ER DT.16-07-08.

COMMUTATOR MFG.

237120.00

WITHIN 15 FOR EACH COMMUTATOR.