BIECCO LAWRIE LIMITED

DETAILS OF CONTRACTS CONCLUDED DURING THE MONTH OF MAY'2008.(VALUE > Rs.50,000/-)

Tender No.

Item/Nature of work

Mode of Tender Enquiry

Date of Publication of NIT

Type of Bidding (Single/Two Bid System)

Last date of receipt of tender

Nos of tenders recd.

Nos. and names of parties qualified after technical evaluation.

Nos. and names of parties not qualified after technical evaluation.

Whether contract awarded to lowest tenderer/ evaluated L(1).

Contract No. & Date

Name of Contractor

Value of Contract (Rs.lacs)

Scheduled date of completion of supplies.

Actual date of start of work

Actual date of completion

Reasons for dealys if any

PROJ/NASL/064

Erection at DVC, Chandrapura site :-

Limited

4-Apr-08

Single

15-Apr-08

3 (R.N. Electrical Works, Mahto Enterprises, Mahadeva Enterprises)

nil

Lowest tender(L1)

BLL/PROJ/DVC-BIADA/ORD/064 Dt. 08.05.08

Mahto Enterprises

S. Tax extra at actual

377658

60 days

9-May-08

Erection, testing and commissioning of 33KV, 3Phase VCB along with all accessories, structures and connectors

Erection, testing and commissioning of 33KV, 3-Phase, Isolators along with sll accessories, structures and connectors including Insulator stacks

Low Level Normal Isolator without Earth Switch & with connectors

Terminal Isolator without Earth Switch & with connectors

Erection, testing and commissioning of 33KV single phase oil filled Current Transformers along with connectors. Protection-cum-Metering CT having Ratio: 600-300-150/5 -5A

Erection, testing and commissioning of 36kV, 10KA Gapless Lighting Arrestor complete with insulating base, surge monitor leakage cur5rent meter, connectors etc.

Erection, testing and commissioning of 33KV, Bus comprising of IPS aluminium etc. complete in all respect(BIADA & CTPS)

2.1/2" Al Bus Pipe

1.1/2" Al Bus Pipe

Transporting assembling & erecting switchyard. structures

Erection, Testing and Commissioning of Juction Boxes of sizes:

a) 1 x 12 way (ACJB)

b) 1 x 12 way (CTJB/PTJB)

Erection, Testing and Commissioning of following Simplex type Control & Relay panel complete with all accessories as per technical specification, for CTPS

a) Simplex type control & Relay panel for two Nos. 33KV outging feeder as per technical specification.

Laying, dressing and clamping of 1100 Volt Grade Copper conductor (FRLS) armoured Control Cable along cable trenches, trays etc. including de-watering and cleaning of trenches etc. as required:

4 C X 14.5 Sq. mm

12 C X 2.5 Sq.mm

7 C X 2.5 Sq.mm

4 C X 2.5 Sq.mm

Laying, dressing and clamping of 1100 Volt Grade Aluminium conductor (FRLS) armoured, Power Cable along cable trenches, trays etc. including de-watering and cleaning of trenches etc. as required:

4 C X 10 Sq.mm

Erection, Testing & Commissiong of 33KV Post Insulator Stack on Pipe Bas support, 2.1/2"/1.1/2" Aluminium Pipe on insulator including fitting fixing of all necessary clamps

Fitting & Fixing of Claimps Connector of different equipments & Bus Support

Termination of 1100 Volt Grade Copper conductor (FRLS)armoured Control Cables (all core at both ends) complete with compressing type cable gland ferrules and cable lugs as required:(Materials will be supplied by BLL)

4 C X 14.5 Sq. mm

4 C X 2.5 Sq.mm

7 C X 2.5 Sq.mm

12 C X 2.5 Sq.mm

Termination of 1100 Volt Grade Aluminium conductor (FRLS)armoured Power Cables (all core at both ends) complete with compressing type cable glandm ferrules and cable lugs as required:(Materials will be supplied by BLL)

4 C X 10 Sq.mm

Erection, testing and commissioning of complete Grounding system comprising laying of Ground mat (40 mm dia M S Rod) at a level of 500/600 mm (or as per design) below ground level, driving of 6.0 Mtr/3.0 Mtr. (or as per design) Long Spikes (40 mm dia M.S Rod) below mat level and laying, dressing and Clamping /Welding of Riser (50 x 6 m G.I. flat) from ground mat to different equipment and structures including welding, belting, painting of joints etc. as required as per approved design, drawing specification (excluding exacavation and back filling of trenches which will be paid separately as per schedule of Civil Works):

6.0 Mtr. Long Spikes (40 mm dia MS Rod) in all types of soil and rock

Ground Mat (40 mm dia MS Rod)

Riser (50 x 6 mm G.I. Flat)

Labour Charges for Earth work in excavation in fdn. Trenches, drains etc. (not exceeding 2 m in width or 10 sqm on plan ) including dressing of sides & ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil & disposal of surplus excavated soils as directed within a lead of 50 m complete as per specifications, drawing & instruction of Engineer-in -Charge :

All kinds of soil

Ordinary rock

Hard rock ( requiring blasting)

Hard rock ( blasting prohibited )

Labour charges for Earthwork in filling in trenches, plinth & sides of foundation etc. in layers not exceeding 200 mm in depth, consolidating & dressing each deposited layer by ramming & watering, lead upto 50 m & lift upto 1.5m including cost of carriage of materials etc. complete as per drgs., specifications & directions.

with excavated earth ( excluding rock )

Earth work in excavation in fdn. Trenches, drains etc.(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides & ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil & disposal of surplus excavated soils ats directed within a lead of 50 m complete as per specifications, drawing & instruction of Engineer-in-Charge

All kind of soil

Ordinary rock

Hard rock (requiring blasting)

Hard rock (blasting prohibited)

Earth work in filling in trenches, plinth & sides of foundation etc. in layers not exceeding 200 mm in depth, consolidating & dressing each deposited layer by ramming & watering lead upto 50 m & lift 1.5m including cost of carriage of materials etc. complete as per drgs., specifications & directions

with approved quality sand

with excavated earth (excluding rock)

with borrowed earth within a lead of 200m

Providing & laying in position plain cement concrete with coarse sand & well graded, washed & screened stone aggregates of approved quantity and size 20 mm & down including maxing, vibrating, curing etc. complete but excluding centering & shuttering as per drawings, specification & direction in foundation & plinth.

Mix 1:4:8

Mix 1:3:6

Supplying, staightening, cutting, bending, cranking, hooking, fixing, binding & placing at any position in superstructure, fdn., & plinth with MS / Torsteel reinforcements in all works of concrete, masonry etc., including supply of binding wire with 18 SWG (1.05mm) galvanised wire twisted tight and/or welding the splices where encessary as per IS codes or direction and holding in position with steel rod spacer/chairs/horses etc. complete.

Brickwork in Cable trench with Bricks of class designation 50 & cement mortar with coarse sand as sepcified below including supply & carriage of all materials to site, scaffoldingh & curing complete as per drg., specifrications and directions:

With 1:4 cement work

With 1:6 cement work

Hiring, erecting, centering, supporting, striking, cleaning etc. of formwork of approved design with statging, props and supports for plain & RCC works with all accessories and at all heights including removal of forms as per drawings, specifications & directions.

Providing and placinfg in position reinforced cement concrete waffle units square or rectangular as per design and shape in 1:1.1/2:3 (1 cement:1.1/2 coarse sand : 3 graded stoneaggregate 10 mm nominal size) including flush or deep ruled pointing at joints in cement mortar 1:2(1 cement : 2 Fine sand), curing, making necessary holes of required sizes for carrying through service lines etc., providing steel hooks for lifting etc., from work in precasting, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement.

Cement plaster to walls & R C C structures including all necessary materials, scaffolding, curing, rounding off, chamfering etc. complete at all heights as per drg. Spec. & directions

12 mm thk. Cement plaster

i) With mix 1:4 (1 cement : 4 Coarse sand)

ii) With mix 1 : 6 (1 cement : 6 coarse sand)

PROJ/DVC-BIADA/066

1.0) Supply of MS Angles as per relevant IS in good conditions of various sizes as given below :-

Limited

9-Apr-08

Single

17-Apr-08

1) Holymoon & Company 2) Swastika steel and allied products 3) Ashoka Tools Pvt. Ltd

NIL

Lowest tender(L1)

BLL/PROJ/DVC-BIADA/ORD/065, dt. 14.05.08

M/s Holymoon & Company

260155

10 days from the date of receipt of order

15-May-08

A) 50 x 50 x 6 mm angle

B)75 x 75 x 6 mm angle

2.0 ) Supply of MS Flat as per relevant IS in good conditions of the following size.

A) 40 x 6 mm Flat

3.0 ) 10 mm thick MS Base Plate (125 x 125 )

PROJ/NASL/059

Supply and fixing of MS gates 1.5 mtr. x 1.8 mtr. (single-leaf) made of strong MS frame work consist of angle, flat, etc., intermediate stiffners, MS square bars, MS sheet, gussets, cleats, etc. including necessary riveting, bolting, welding, locking and hanging arrangements as per enclosed drawing and as per direction of BLL Site-in-Charge

Limited

26-Feb-08

Single

4-Mar-08

3 (R.K. Construction, Subodh Kumar Singh Construction, Maa Bhawani Construction)

nil

Lowest tender(L1)

BLL/PROJ/NASL-R/ORD/054 Dt. 22.05.08

R. K. Construction

32000

10 days from the date of receipt of order

23-May-08

Supply and fixing of MS gate 4.8 mtr. x 1.8 mtr. (two-leaves) made of strong MS frame work consist of flat, etc., intermediate stiffners, MS square bars, gussets, cleats, etc. including necessary riveting, bolting, welding, locking and hanging arrangements as per enclosed drawing and as per direction of BLL Site-in-Charge

PROJ/DVC-BIADA/070

Cement (Grade - 53) Portland

Limited

5-May-08

Single

05/12/08

3 (Sandeep Enterprise, Rounak Enterprises, B.K. Brothers)

nil

Lowest tender(L1)

BLL/PROJ/DVC-BIADA/ORD/066 Dt. 22.05.08

Sandeep Enterprises

482000

2 days

23-May-08

Approved Make : Make – LAFARGE / ACC / L&T (ULTRATECH) / BIRLA CEMENT, Durgapur

PROJ/NASL/065

Miscellaneous Civil works :-

Limited

5-May-08

Single

05/12/08

3 (Associated Engineers, Hari Om Construction, Amarendra Prasad Singh & Co.)

nil

Lowest tender(L1)

BLL/PROJ/NASL-R/ORD/055 Dt. 22.05.08

Hari Om Construction

710600

25 days

23-May-08

Supply & fixing of Rolling Shutter (MS - 3m x 2.7m)

Double leaf glazed door, glass thickness - 6mm (size : 1.8m x 2.3m)

Al. framed single leaf glazed door, glass thickness - 6 mm (size : 1m x 2.3m)

Al. framed glazed openable window (size : 0.9m x 1.4m)

Al. framed glazed fixed louvers (size : 0.6m x o.6m)

Supply, fitting and fixing of security fencing including painting [as per approved drawing, (PVC quoted wire mesh will be supplied by BLL)]

Anti weed treatment for substation

Supply and Spreading of gravel in switchyard (Depth : 150mm)

Providing and applying of resin bonded granular coating to the exterior surface of the entire control room building

Earth work in excavation of foundation in all types of soil including removing or staking the soil within a lead of 75 mtrs and providing necessry trimming necessary dewatering

Providing and casting plain cement concrete (1:4:8) with graded stone chips (20mm size) in all types of foundation including side shutting complete in all respects as per the instruction of Site In Charge.

Providing and casting reinforcement cement concrete (RCC) nominal mix (1:1.5:3) without shuttering and reinforcement.

Providing, fitting and fixing of roof tiles on sub station building including base concreting, leveling and final finishing.

PROJ/NASL/064

Erection of 33KV Over Head Line :-

Limited

5-May-08

Single

05/12/08

3 (Hi-Tech Electro Mechanical, Associated Engineers, Maa Bhawani Construction)

nil

Lowest tender(L1)

BLL/PROJ/NASL-R/ORD/056 Dt. 22.05.08

Hi-Tech Electro Mechanicals

458540

25 days

23-May-08

Fitting and Fixing of GI Sections with angle, channel, V Bracket, bracing, cradle guard, nuts, bolts, etc. for 33 KV transmission lines on Rail Pole

Fitting and Fixing of Disc insulator set (4 nos.) including Hardware fittings with 'U' Bolted/4 Bolted type clamp for ACSR conductor (for transmission lines)

Fitting and Fixing of Post Insulator (set, for suspension) for ACSR conductor

Fitting and Fixing of Guy insulator for 33KV GI Stay Wire in transmission lines

Stringing, jumpering, testing and charging of ACSR Panther conductor (CKt, 3 wire conductor)

Installations of Earth spike for transmission line Rail Poles including connection of GI Flat/wire.

Fitting and fixing of GI Stay wire from clamp of rail poles to HT stay set

Fitting and fixing of GI Wire for earthing and cradle guard

Laying of 50x6 GI Flat for earthing including fitting of 1 no. bolt in each rail pole

Fitting and fixing of Barbed wire in fencing including supply of barbed wire.

Fitting and fixing of Danger Board including supply of Danger board

33 KV

415 V

PROJ/DVC-BIADA/069

1) Barbed Wire

Limited

22-Apr-08

Single

3-May-08

1) M/s Birani & Co. 2) M/s Sunrise wire netting industries

NIL

Lowest tender(L1)

BLL/PROJ/DVC-BIADA/ORD/067, dated 22.05.08

M/s Birani & Co.

133651

7 days from the date of receipt of order.

23-May-08

2) Chainlink Fencing 2 Mtr width

PROJ/DVC-BIADA/074

CONTROL ROOM FINISHING CIVIL WORKS

Limited

14-May-08

Single

20-May-08

3 (Arun Sharma, Sarita Interiors, Mahto Enterprise)

nil

Lowest tender(L1)

BLL/PROJ/DVC-BIADA/ORD/068 Dt. 28.05.08

Arun Sharma

572410

60 days

28-May-08

Brickwork in foundation, plinth & Superstructure with Bricks of Class designation 50 & cement mortar with coarse sand as specified below including supply & carriage of all materials to site, scaffolding & curing complete as per drg., specifications and directions :

With 1: 4 cement mortar

With 1: 6 cement mortar

Half brick Masonry with Bricks of Class designation 50 in cement mortar mix 1 : 4 with coarse sand including supply, carriage, scaffolding, curing etc. complete in superstructure.

Extra for providing & placing in position 2 nos. 6 mm dia MS bars at every 3rd course of half brick masonry with F.P.S. Bricks of Class designation 50.

Cement plaster to walls & R.C.C. structures including all necessary materials, scaffolding, curing, rounding off, chamfering etc. complete at all heights as per drg, spec. & directions.

20 mm th. cement plaster

i) With mix 1:4 ( 1 Cement : 4 Coarse sand )

ii) With mix 1:6 ( 1 Cement : 6 Coarse sand )

12 mm th. cement plaster

i) With mix 1:4 ( 1 Cement : 4 Coarse sand )

ii) With mix 1:6 ( 1 Cement : 6 Coarse sand )

Extra over item (25) for providing, adding & mixing thoroughly water-proofing reagent (such as cico, acco proof, Impermo etc.) in cement plaster in proportion recommended by the manufacturers:

i) 12 mm cement plaster 1 : 4

ii) 20 mm cement plaster 1 : 4

6 mm thick plastering of ceiling with cement mortar 1 : 3 ( 1 Cement : 3 Fine sand ) to exposed faces of R.C.C. slabs, sides & soffits of beams in all floors and at all heights inclusive of cost of all materials.

Neat cement punning about 1.5 mm. Thick in wall, dado, windowsill, floor, drain etc.

25 mm. thick a.rtificial grey patent stone in flooring, skirting, dado etc. with mix. 1:2:4( 1 cement : 2 Coarse sand : 4 graded stone aggregates ) with 12.5 mm nominal size stone aggregates with a floating coat of neat cement slurry to be laid in panels not exceeding 1.0 sqm. in area or as directed including rounding off at corners.

40 mm. thk. Mosaic flooring to be laid in panels of size 600 mm. x 600 mm. With marble chips rubbed & polished to granolithic finish having 31 mm. thk. Concrete (1 Cement: 2 Coarse Sand: 4 graded stone aggregates of 13mm. & down) as under layer. Top layer is 9 mm. thk. & consists of white and / or black and/or coloured marble chips of 7 mm. to 4 mm. (graded) laid in white & grey cement (1:1) in the proportion of cement marble powder mix 3: 1 (3 cement: 1 Marble powder) by weight in proportion 4:7 (4 Cement marble powder: 7 Marble chips) by volume including cement slurry etc. complete as per specifications, supply of all materials & direction of Engineer-in-Charge.

Precast terrazzo tiles of 22 mm. thk. In floors & dado With graded marble chips of size upto 13 mm. in cement with mosaic coat of 6 mm. laid on 20 mm. thk. bed of cement mortar ( 1 Cement : 4 Coarse sand ). The mosaic coat shall consist of marble chips (6 mm. to 3 mm. Graded), marble dust & cement in the proportion 5:1:3 with grey & white cement (1:1). The rate is inclusive of filling the jts. with appropriate cement slurry, rubbing, polishing and supply of all materials etc. in floors & skirting.

40 mm thick artificial flooring to be laid in panels not exceeding 1.0 sqm. in area & will consist of two parts 13 mm. thick hard topping as one part over 27 mm. thk. Screeded bed as the other part. The screeded bed will consist of a mix of cement concrete (1:1:2) with crushed stone aggregates 10 mm. & down size. This shall be mixed, placed thoroughly tamped with a grill hammer, floated & screeded to receive the 13 mm.thk. hard topping. which will be applied while the screeded bed is still wet. This consists of 1 part of cement ironite by mixture (1 part ironite to 4 parts of cement by wt.) to 2 parts of well graded approved crushed granite of maximum 6 mm. size. Water shall be added after mixing the aggregate, placing, tamping, floating & trowelling being done in accordance with manufacturer’s recommendations. Care shall be taken not to over-trowel until the initial set has taken place. Curing shall be done by covering with wet sacking for 2 days & then by ponding 50 mm. water for 2 weeks.

18 mm. thick marble chips skirting or dado (heights as per approved drg.), stairs and window sill rubbed & polished to granolithic finish, under layer 12 mm thk. cement plaster (1:3) & top layer 6 mm thk. marble chips of approved colour of 4 mm. & down gauge laid cement marble powder mix 3:1 ( 3 Cement : 1 Marble powder ) by weight in proportion of 4 :7 ( 4 Cement marble powder : 7 Marble chips ) by volume in grey & white cement 1:1 including rounding off junctions with the floor including cost of all materials complete.

Fixing 40 mm. Wide & 4 mm. Thick glass strips in joints of terrazzo / cement concrete floors.

Fixing of glazed tiles of “Johnson” or approved equivalent quality and shade of 5 mm. Thick conforming to IS : 13753 in skirting and dado on 12 mm. thick cement plaster (1:3) including applying cement slurry and joined with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade including corner angles and beading all complete as per direction.

Laying in position 10 mm. Thick Acid / Alkali resistant tiles of approved make & colour in flooring / trench / skirting etc. conforming to IS : 4457 in 6 mm bedding and jointing of potassium silicate base mortar as per IS 4832 ( Pt-I) and pointing of 6 mm wide x 12 mm deep joints with polyester / Epoxy based mortar. The concrete surface shall be treated with 2 (two) coats of Bitumastic primer before laying the tiles.

Prepare surface & supply Two or more coats of cement colour on new work such as SNOWCEM – Plus/ DUROCEM EXTRA of approved colour & shade on exterior faces of walls, columns, beams etc. at all heights including the rough cleaning & smoothening of surface, cost of all materials, curing, scaffolding etc. complete

White washing with lime (three or more coats) on new work to give an even shade at all heights including supply of all materials, scaffolding etc. complete.

Colour washing on new work ( two or more coats ) with a base coat of white washing with lime of approved shade to give an even shade at all heights including scaffolding, cleaning & smoothening of surface thoroughly as per directions complete, with supply of all materials.

Distempering with plastic or acrylic emulsion paint (two or more coats) of approved quality, shade & colour (J&N, Berger, Asian Paints) over and including a base coat of cement primer of approved quality to give an even shade including preparation of surface with plaster of paris punning of 2.0mm thickness over plastered surface to prepare the surface even & smooth etc. complete at all heights with supply of all materials. (The rate is inclusive of any scaffolding from ground or plinth)

Distempering with dry distemper (two or more coats) of required shade & colour on new work over and including priming coat of whiting to give an even shade with cost of all materials (Berger, Jenson & Nicklonson, Asian Paints) at all heights, scaffolding etc. complete.

Supplying, providing & painting two or more coats of acid proof paint of approved brand & manufacturer of required colour to give an even shade on the walls, ceiling , doors, etc. including the cost of materials, labour, scaffolding etc. complete as per specification and direction.

Prepare the surface & painting (two or more coats) synthetic enamel paint of approved quality and shade ( J&N, Berger, Asian Paints) on new work over and including a coat of ready mixed red oxide zinc chromate primer of approved brand & manufacturer in steel work including cost of all materials, scaffolding etc. complete.

Prepare the surface & painting (two or more coats) Aluminium paint of approved quality and shade ( J&N, Berger, Asian Paints) on new work over and including a coat of ready mixed Aluminium primer of approved brand & manufacturer in steel work including cost of all materials, scaffolding etc. complete.

PROVIDING, FITTING, FIXING FALSE CEILING, AL. DOOR, ETC

Providing, fixing & fitting at site anodised aluminium natural colour matt finished false ceiling frame work in approx. 60cm x 60cm exposed grid consisting of M/s. INDAL make aluminium T sections as main members (section 3121) 36.5mm x 23.5mmx1.57mm (minimum), cross members & wall angles (section 3122) 23.5mmx23.8mmx1.57mm (minimum) etc. complete with supply & fixing necessary 5mm (3/16 inch) dia bright bar suspenders treated with anti corrosive paint, special - 150mm. Long adjustable nuts & washers, fixing pins etc. including supplying & fixing 13mm (1/2inch) thick white semi-perforate Gypsum board of adequate size.

Providing, fitting & fixing aluminium door (openable) with best quality fittings & fixtures made of anodised (12 - 15 ) natural matt finished extruded section of M/s. INDAL, glass panes of 5.5mm thick (weight not less than 13.75 kg/sqm) & all fastenings etc., with built in door closer (floor springs hydraulically operated) complete as per drgs., specifications & directions for all heights. The door will consists of outer frame section 9221 (101.5mm x 44.5mm x 2.5mm), Door Vertical 9202 (50mm x 44.5mm x 2.5mm), Door Top 9201 (50mm x 44.5mm x 2.5mm), Door middle 9219 (50mm x 44.5mm x 2.5mm), Door bottom 9200 (100mm x 44.5mm x 2.5 mm), and with necessary approved type rubber gasket, brass lock, push plate and with all other accessories. The doors will be fixed in walls with 16 x 3.15mm. 10 cm long embedded in cement concrete blocks 15 x 10 x 10 cm of proportion (1:3:6) or with wooden plugs and screws and with fixing clips or with bolts and nuts as required.

9663/AS

TRANSPOSED ENAM.CU 7 X 14 SWG O/A (3.95 X 7.75 ) MM, CL-H

LIMITED

10-04-08

SINGLE

17-04-08

BHATTER ELECTRICAL & ELECTRONICS

NIL

L-1

MB/11845/ER Dt.02-05-08.

BHATTER ELECTRICAL & ELECTRONICS

53549.00

WITH IN 15 DAYS.

9670/JC

100KVA POWER TRANSFORMER 400V/650V

LIMITED

22-04-08

SINGLE

28-04-08

1.FRONTER ENGINEE RING (ELECTRO MEC H). 2. MILIP ELECTRICALS

NIL

L-1

MB/11847/ER Dt.02-05-08.

FRONTER ENGI NEERING(ELECTRO MECH )

151840.00

WITHIN 10 DAYS

9693/AS

EN. DGC COPPER COND. (3.1+0.03 X 5.00+_0.03)MM2. E1G1

LIMITED

28-04-08

SINGLE

03-05-08

1.SWARNAGIRI WIRE PVT. LTD. 2.SAGUN COPPER CONDUCTORS(P) LTD.

NIL

L - 1

MB/11853/ER dt.06-05-08

SAGUN COPPER CONDUCTORS (P) LTD.

176756.00

WITH IN 15 DAYS

9673/AS

1.12MM X 50 MT X 2MIL NOMEX TAPE. 2. 20MM X 50 MT X 2MIL NOMEX TAPE

LIMITED

23/04/08

SINGLE

28/4/2008

1. HATIM DIELECTRIC (P) LTD.

NIL

L - 1

MB/11854/ER dt.06-05-08

1. HATIM DIELECTRIC (P) LTD.

230554.00

WITH IN 4 WEEKS.

9677/AS

20MM X 50MT X 2MIL NOMEX PAPER

LIMITED

28-04-08

SINGLE

05-05-08

1.COMMERCIAL SUPPLY SYNDICATE. 2.HATIM DIELECTRIC (P) LTD. 3.M.S. INDUSTRIES.

NIL

L-1

MB/11887/ER Dt.15-05-08.

COMMERCIAL SUPPLY SYNDICATE

55848.00

WITH IN 7 DAYS

9694/AS

MFG OF NEW SILVER BEARING COMMUTATOR

LIMITED

29-04-08

SINGLE

06-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.DOLPHIN ELECTRIC (INDIA)

NIL

L-1

MB/11889/ER Dt.22-05-08.

THE BENGAL COMMUTATOR WORKS

416000.00

WITH IN 40 DAYS

9696/AS

MFG OF NEW SILVER BEARING COMMUTATOR

LIMITED

29-04-08

SINGLE

06-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.DOLPHIN ELECTRIC (INDIA)

NIL

L-1

MB/11890/ER Dt.22-05-08.

THE BENGAL COMMUTATOR WORKS

416000.00

WITH IN 40 DAYS.

9695/AS

SILVER BEARING COMMUTATOR. SEG-147

LIMITED

29-04-08

SINGLE

06-05-08

1.THE BENGAL COMMUTATOR WORKS. 2.DOLPHIN ELECTRIC (INDIA)

NIL

L-1

MB/11891/ER Dt.22-05-08.

THE BENGAL COMMUTATOR WORKS

73840.00

WITH IN 4 DAYS

9737/AS

EN DGC CU COND (4.5 +-.03 X 1.50+0.03) MM2, E2G1,H

LIMITED

14-05-08

SINGLE

19-05-08

1.PARAMOUNT CONDU CTORS LT. 2.SWARNAGIRI WIRE INSULATIONS PVT.LTD. 3.SAGUN COPPER CONDUCTORS(P) LTD.

NIL

L-1

MB/11903/ER Dt.22-05-08.

SAGUN COPPER CONDUCTORS(P) LTD.

142601.00

WITH IN 15 DAYS

9732/JC.

HARD DRAWN,ELECTROLITY COPPER BAR

LIMITED

12-05-08

SINGLE

19-05-08

1.J.S.INDUSTRIES 2.MA-KALI ENGINEERING

NIL

L-1

MB/11920/ER Dt.30-05-08.

J.S.INDUSTRIES

67600.00

WITH IN 21 DAYS

BLL/533

WIRING OPERATION

Limited

4/11/2008

Single

18.4.08

N/A

L(1)

HR/44182/7114, DT.20.5.08

AMIYA INDUSTRIES

2.08

JUN'08

BLL/535

COPPER WIRE 4 SQMM

Limited

16-Apr-08

Single

04/24/08

N/A

L(1)

HR/44130, DT.5.5.08

ECKO CABLES PVT. LTD.

2.48

BLL/536

POWER PACK

Limited

17-Apr-08

Single

04/24/08

N/A

L(1)

HR/44132, DT.6.5.08

HYECO SYSTEMS AND DEVICES

4.39

BLL/537

ELECTRICAL COMP

Limited

24-Apr-08

Single

05/05/08

N/A

L(1)

HR/44235, DT.30.5.08

MIPALLOY

6.43

BLL/538

M.S.FLATS

Limited

26-Apr-08

Single

05/03/08

N/A

L(1)

HR/44158, DT.13.5.08

CONTINENTAL STEEL SYNDICATE

2.34

BLL/539

LM6 TOP PLATE

Limited

5-May-08

Single

05/12/08

N/A

L(1)

HR/44213, DT.28.5.08

N ' MACCO (INDIA) INDUSTRIES

11.78

BLL/540

ELECTRODE

Limited

9-May-08

Single

05/17/08

N/A

L(1)

HR/44241, DT.31.5.08

ASSOCIATED INDUSTRIES & TRADING CORPN.

0.49

HR/44240, DT.31.5.08

SIMPLEX INDIA MARKETING CO

1.67

BLL/547

WEATHER PROOF COM

Limited

15-May-08

Single

05/20/08

N/A

L(1)

HR/44220, DT.29.5.08

GENERAL AGENCY & TRADING CO.

1.26

ENQ/0455

RAINWATER HARVESTING PHASE II PLUMBING WORK

LIMITED TENDER

12.04.08

TWO

30.04.08

4, M/S WALLS & ROOFS, M/S M C CONSTRUCTION, M/S KALPANA TRADERS, M/S LEE CONSTRUCTION

M/S S K GHOSH & COMPANY

AD/HR/2146/SER DT. 24.05.08

M/S LEE CONSTRUCTION

1.83

90 DAYS

31.05.08

31.08.08