BIECCO  LAWRIE  LIMITED
DETAILS OF CONTRACTS CONCLUDED DURING THE MONTH OFAUGUST'2008.(VALUE > Rs.50,000/-)
                           
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
                                 
Tender No. Item/Nature of work Mode of Tender Enquiry Date of Publication of NIT Type of Bidding (Single/Two Bid System) Last date of receipt of tender Nos of tenders recd. Nos. and names of parties qualified after technical evaluation. Nos. and names of parties not qualified after technical evaluation. Whether contract awarded to lowest tenderer/        evaluated L(1). Contract No. & Date Name of Contractor Value of Contract (Rs.lacs) Scheduled date of completion of supplies. Actual date of start of work Actual date of completion Reasons for dealys if any
                                 
PROJ/DVC-BIADA/088 Earthing Limited 19-Jul-08 Single 25-Jul-08 3 3 (S.S.D. Consulting Engineers, R.A. Industrial Services, UE Consultants & Engineers Private Limited) nil Lowest tender(L1) BLL/PROJ/DVC-BIADA/ORD/078 Dt. 04.08.08 R.A. Industrial Services 174158 60 days 4-Aug-08    
  For Biada                              
  Earthing Design Calculation as per IEEE                              
  Sub Station Earthing Layout Drawing including details drawing for junction points.                              
  Typical Structure Earthing Details                              
  Earthing materials quantity calculations                              
  For Chandrapura                              
  Earthing Design Calculation as per IEEE                              
  Sub Station Earthing Layout Drawing including details drawing for junction points.                              
  Typical Structure Earthing Details                              
  Earthing materials quantity calculations                              
  Equipment and Cable Trench Layout :                              
  For Biada                              
  Sub Station Equipment Layout Plan Drawing                              
  Elevation for Switchyard                              
  Connectors and Al. Pipe Bus details calculation or quantity                              
  Cable Trench Layout in Sub Station                              
  Cable Trench Layout in Control Room                              
  Details sectional drawing for cable trenches                              
  Equipments Layout in control room                              
  Foundation Layout in Sub Station                              
  For Chandrapura                              
  Sub Station Equipment Layout Plan Drawing                              
  Elevation for Switchyard                              
  Connectors and Al. Pipe Bus details calculation or quantity                              
  Cable Trench Layout in Sub Station                              
  Foundation Layout in Sub Station                              
  Lighting                              
  Sub Station Outdoor Lighting Layout Drawing                              
  Control Room indoor lighting Layout Drawing                              
  Total quantity measurement of Indoor & Outdoor Lighting materials                              
  Cable route drawing for lighting (Indoor & Outdoor)                              
  Street light Pole Position drawing including Gate Light                              
  Master Single line diagram for AC Distribution System including Lighting                              
  Equipment Specification with BOM                              
  Main Lighting Distribution Boards                              
  Sub Lighting Distribution Boards                              
  CTJB & PTJB                              
  ACJB for Incoming Auxiliary Power Supply Sub Station equipments                              
  Street light Pole JB                              
  Gate Light Pole JB                              
  Switchyard Lighting JB                              
  Power DB for Welding                              
  Cable Schedule                              
  Power Cable                              
  Control Cable                              
  Lighting Cable                              
  Terminal Plan for Control Cable                              
  Control Schematic drawing                              
  Power and Control Schematic                              
  Emergency Light Control Drawing                              
  Preparation of all as built drawings                              
                                 
PROJ/DVC-WB/023 Supplying & Fabricating  Foundation Steel Bolts including threading as per enclosed drawings complete with 2(two) nos. nuts. The 200mm top portion of bolt is to be galvanised. Limited 19-Jul-08 Single 28-Jul-08 2 1) M/s Holymoon & Company   2) M/s Simplex Engineering Co. NIL Lowest tender(L1) BLL/PROJ/DVC-WB/ORD/016, DATED 09.08.08 M/s Holymoon & Company 258644 30 days from order date 9-Aug-08    
  20mm dia HD Bolt, 600mm long, 150 thread at top, 50x8 TH 50 LG at a distance of 30mm from bottom, with three nuts (Ref Drawing: E/S/C-729, Rev-0)                              
  16mm dia HD Bolt, 600mm long, 150 thread at top, 50x8 TH 50 LG (welded) at a distance of 30mm from bottom, with three nuts (Ref Drawing: E/S/C-727, Rev-1)                              
  20mm dia HD Bolt , J type, 610 mm(L), 90mm bend, 100mm thread at top with 2 nuts (Ref Drawing: E/S/C-762, Rev-1)                              
  20mm dia HD Bolt , J type, 610 mm(L), 90mm bend, 100mm thread at top with 2 nuts (Ref Drawing: E/S/C-719, Rev-1)                              
  20mm dia HD Bolt , J type, 510 mm(L), 90mm bend, 100mm thread at top with 2 nuts (Ref Drawing: E/S/C-779 )                              
  20mm dia HD Bolt , J type, 510 mm(L), 90mm bend, 100mm thread at top with 2 nuts (Ref Drawing: E/S/C-778 )                              
  25mm dia H.D Bolt J type, 1000mm (L), 75mm bend, 75 mm thread at top with 2 nos nut.(Ref drawing-E/S/C-610)                              
  20mm dia HD Bolt, 825mm long, 100 mm thread at top, 75x10 TH 15 LG (welded) at a distance of 30mm from bottom, with two nuts (Ref Drawing: E/S/C-731)                              
  25mm dia H.D Bolt J type, 1000mm (L), 100mm bend, 100 mm thread at top with 2 nos nut.(Ref drawing-E/S/C-504)                              
  16mm dia H.D Bolt(with two units) J type, 550mm (L), 75mm bend, 50 mm thread at top with 2 nos nut.(Ref drawing-E/S/C-504)                              
  16mm dia HD Bolt, 550mm long, 150mm  thread at top, 50x6 THK 50 LG  with two nuts (Ref Drawing: E/S/C-726, Rev-1)                              
  25mm dia H.D Bolt J type, 1150mm (L), 100mm bend, 125 mm thread at top with 2 nos nut.(Ref drawing-E/S/C-688 rev-02)                              
                                 
                                 
PROJ/DVC-BIADA/072 Construction of Road :- Limited 5-May-08 Single 05/14/08 3 3 (Raj Construction, Sri Shivshakti Enterprises, S.R. Enterprises) nil Lowest tender(L1) BLL/PROJ/DVC-BIADA/ORD/80 Dt. 13.08.08 Raj Construction 1358700 60 days 13-Aug-08    
  Preparation of subgrade by excavating earth (in all sorts of soil) to an average of 225 mm depth (box cutting), dressing to camber and grades and consolidation with road roller including  making good the undulation etc. & disposal of surplus earth upto 50 metres.                              
  Consolidation of subgrade with power road roller of 8 to 12 tonnes capacity including making good the undulations etc. with earth or quarry spoils etc. & rerolling the subgrade                              
  Supplying and stacking of 90 mm to 45 mm graded stone aggregate at site                              
  Laying water bound macadam base course with 90 mm to 45 mm size stone aggregate including stone screening with 13.2  mm size and blinding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete (payment for stone  aggregate, screenings, kankar, morum and red bajri etc. to be made separately)                              
  Supplying and stacking of moorum at site                              
  Supplying and stacking of 13.2 mm nominal size (type A) stone screenings / chipping at site                              
  Brick edging with bricks laid length wise with half brick depth including excavation refilling and disposal of surplus earth lead upto 50 metres.                              
  2.5 cm premix carpet surfacing with 2.25 cum. And 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm. And 52 kg and 56 kgs of hot bitumen per cum. of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen with paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70 grames per kg of asphalt, including consolidation with road roller of 6 to 9 tonne capacity etc. complete; (tack coat to be paid for separately).                              
  Providing and applying tack coat using bitumen emulsion (Rapid Setting) complying with IS 8887 - 1995, on W.B.M @ 0.4 kg/sqm Spraying the bitumen emulsion with mechanically operated spray unit, cleaning and preparing the existing road  surface as per specifications.                              
  Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade 80 / 100 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete                              
  Providing and laying 50 mm compacted thickness Bitumen Penetration Macadam with hard coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. with bitumen of suitable penetration grade (with paving asphalt 80/100 @ 50 kg/10 sqm) including required key aggregate as specified, spreading coarse aggregate with the help of self propelled / tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader comlete including consolidation with raod roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surfaceaccuracy.                              
  Earth Working filling  including dressing, watering & ramming in layers not exceeding 15 cm.in embankment etc. formed by excavated earth                              
                                 
PROJ/DVC-BIADA/085 40 mm dia M.S Rod(Round) Limited 10-Jul-08 Single 21-Jul-08 2 1) Continental Steel Syndicate    2) Narindra & Narindra NIL Lowest tender(L1) BLL/PROJ/DVC-BIADA/ORD/079, dated 11.08.08 Narindra & Narindra 441530 7 days 11-Aug-08    
                                 
BLL/569 PUSH BUTTON SWITCH LIMITED 5-Jul-08 SINGLE 19-Jul-08 3 N/A N/A L(1) HR/44524, DT.5.8.08 BHAGIRATH ELECTRIC COMPANY 0.65 OCT'08      
                                 
BLL/575 SERVO CONTROLLED VOLTAGE STABILISER LIMITED 12-Jul-08 TWO 21-Jul-08 3 N/A N/A L(1) HR/44604/CAPEX, DT.27.8.08 MOTOLINE ELECTRONICS 0.58 SEP'08      
                                 
BLL/576 PORTABLE AIR COMPRESSOR LIMITED 12-Jul-08 TWO 21-Jul-08 1 N/A N/A L(1) HR/44607/CAPEX, DT.28.8.08 U D MARKETING PVT. LTD., 0.70 SEP'08      
                                 
BLL/579 TRANSFORMER OIL LIMITED 22-Jul-08 SINGLE 5-Aug-08 2 N/A N/A L(1) HR/44540, DT.11.8.08 INDIAN PETRO PRODUCTS MFG PRIVATE LTD 5.08 OCT'08      
                                 
BLL/580 PACKING CRATE LIMITED 22-Jul-08 SINGLE 26-Jul-08 3 N/A N/A L(1) HR/44508, DT.4.8.08 ANWAR ALI & COMPANY 2.51 DEC'08      
                    HR/44509 HASSAN BROTHERS 1.75 DEC'08      
                                 
BLL/581 MACHINING COMP. LIMITED 24-Jul-08 SINGLE 29-Jul-08 3 N/A N/A L(1) HR/44558, DT.14.8.08 INDO DESIGNERS 1.82 OCT'08      
                    HR/44560 MA BHADRAKALI ENGINEERING WORKS 0.72        
                    HR/44559 NAVA BHARAT ENTERPRISE 1.09        
                                 
BLL/582 MACHINING COMP. LIMITED 26-Jul-08 SINGLE 2-Aug-08   N/A N/A L(1) HR/44567, DT.19.8.08 HARA BROTHERS 0.07 OCT'08      
                    HR/44568 MIDAS ENGINEERING WORKS 0.05        
                    HR/44569 PRASAD ENGINEERING 0.18        
                    HR/44566 T.M.ENGINEERING WORKS 0.16        
                                 
BLL/583 COPPER FLAT LIMITED 2-Aug-08 SINGLE 8-Aug-08 3 N/A N/A L(1) HR/44543, DT.12.8.08 ARYAVARTA DHATU UDYOG 4.01 AUG'08      
                                 
BLL/584 COPPER ROD LIMITED 2-Aug-08 SINGLE 8-Aug-08 3 N/A N/A L(1) HR/44544, DT.12.8.08 ARYAVARTA DHATU UDYOG 3.21 AUG'08      
                                 
BLL/586 COPPER ROD LIMITED 8-Aug-08 SINGLE 14-Aug-08 3 N/A N/A L(1) HR/44572, DT.19.8.08 ARYAVARTA DHATU UDYOG 3.44 AUG'08      
                                 
BLL/587 M/C. COPONENTS LIMITED 14-Aug-08 SINGLE 08/20/08   N/A N/A L(1) HR/44581, DT.23.8.08 T.M.ENGINEERING WORKS 0.47 OCT'08      
                                 
ENQ/0485 RENOVATION OF LOCO SHED AT SGW LIMITED TENDER 02.07.08 SINGLE 17.07.08 4 1) WALLS & ROOFS, 2) M C CONSTRUCTION, 3) S K GHOSH & COMPANY & 4) BHATTACHARYA CONSTRUCTION   L1 AD/HR/2182/SER DT. 14.08.08 M/S M C CONSTRUCTION 1.67 15 DAYS      
                                 
ENQ/0486 RENOVATION OF LOCO SHED AT SGW LIMITED TENDER 02.07.08 TWO BID 17.07.08 3 1) WALLS & ROOFS, 2) M C CONSTRUCTION, 3) BHATTACHARYA CONSTRUCTION   L1 AD/HR/2184/SER DT. 30.08.08 M/S M C CONSTRUCTION 4.07 75 DAYS      
                                 
9773/AS MFG OF SILVER BEARING  COMMUTATOR OF 171 SEG. LIMITED 16-05-08 SINGLE 24-05-08 3 1.THE BENGAL COMMUTATOR WORKS. 2.DOLPHIN ELECTRIC (INDIA).                           3.SAHNEY COMMUTATORS PVT. LTD. NIL L - 1 MB/12087/ER Dt.01-08-08. THE BENGAL COMMUTATOR WORKS 1138800.00 THIS ORDER IS FOR ONE YEAR RATE CONTRACT FROM AUG'08 TO JUL'08. AUG'08 31ST JULY'09  
                                 
9781/AS NEW COMMUTATOR WITH ETP GRADE COPPER SEGMENT-155 LIMITED 17-05-08 SINGLE 24-05-08 3 1.THE BENGAL COMMUTATOR WORKS. 2.COMMUTATOR MFG. 3.DOLPHIN ELECTRIC (INDIA). NIL L - 1 MB/12125/ER Dt.012-08-08. COMMUTATOR MFG 122304.00 THIS ORDER IS FOR ONE YEAR RATE CONTRACT FROM AUG'08 TO JUL'08. AUG'08 31ST JULY'09  
                                 
9772/AS MFG OF NEW COMMUTATOR AS PER SAMPLE/DRAWING LIMITED 16-05-08 SINGLE 24-05-08 3 1.THE BENGAL COMMUTATOR WORKS. 2.DOLPHIN ELECTRIC (INDIA).                           3.SAHNEY COMMUTATORS PVT. LTD. NIL L - 1 MB/12088/ER Dt.01-08-08. THE BENGAL COMMUTATOR WORKS 1001083.00 THIS ORDER IS FOR ONE YEAR RATE CONTRACT FROM AUG'08 TO JUL'08. ON REQUEST    
                                 
9979/AS H-71 THINNER - 218 LIMITED 09-06-08 SINGLE 15-06-08 2 1. BRITISH ELECTRIC MANUFACTURING CO.    2.HATIM AND COMPANY. NIL L-1 MB/12158/ER Dt.28-08-08. BRITISH ELECTRIC MANUFACTURING CO. 99834.00 WITHIN 15 DAYS. ON REQUEST    
THINNER T- DR. BECK (234 FOR INSULATING VARNISH )
THINNER 205 FOR ELMO N-160
                                 
9964/AS EN DGC CU COND. (4 X 2.6 )MM2 LIMITED 30-07-08 SINGLE 08-08-08 2 1.PARAMOUNT CONDUCTORS LTD.    2.SAGUN COPPER CONDUCTORS (P) LTD. NIL L-1 MB/12135/ER Dt.13-08-08. SAGUN COPPER CONDUCTORS(P) LTD. 124533.00 WITHIN 15 DAYS. 19-08-08 10/9/2008  
                                 
9924/AS EN DGC CU COND. (3.8 X 6.85 )MM2. EIGI,H LIMITED 23-07-08 SINGLE 31-07-08 3 1. PARAMOUNT CONDUCTORS LTD   2.SWARNAGIRI WIRE INSULATIONS PVT. LTD. 3.SAGUN COPPER CONDUCTORS(P) LTD. NIL L-1 MB/12121/ER Dt.12-08-08. SAGUN COPPER CONDUCTORS(P) LTD. 68737.98 WITHIN 15 DAYS. 18-08-08 10/9/2008  
                                 
9925/AS EN DGC CU COND. (1.55 X  7.95 )MM2. EIGI,H LIMITED 23-07-08 SINGLE 31-07-08 3 1. PARAMOUNT CONDUCTORS LTD   2.SWARNAGIRI WIRE INSULATIONS PVT. LTD. 3.SAGUN COPPER CONDUCTORS(P) LTD. NIL L-1 MB/12122/ER Dt.12-08-08. SAGUN COPPER CONDUCTORS(P) LTD. 86797.79 WITH IN 15 DAYS. 18-08-08 10/9/2008